Laizhou Baoyi Machinery Co.,Ltd.

ブレーキディスク
Brake Disc

• Location：Front Axle
• Height：36 mm
• Diameter：257 mm
• Centering Diameter：88 mm
• Pitch Circle Diameter：109 mm
• Brake Disc Thickness：22 mm
• Minimum Thickness：20.6 mm
• Number Of Holes：6
• Solid Or Vented：V
• Weight：5.5 kg

ブレーキディスク
Brake Disc

• Location：Front Axle
• Height：40 mm
• Diameter：280 mm
• Centering Diameter：88 mm
• Pitch Circle Diameter：108 mm
• Brake Disc Thickness：27 mm
• Minimum Thickness：25.6 mm
• Number Of Holes：6
• Solid Or Vented：V
• Weight：6.9 kg

ブレーキディスク
Brake Disc

• Ø: 293 mm
• Brake Disc Type: Vented
• Num. of holes: 12
• Br. Disc Thickness: 40.0 mm
• Pitch Circle Ø: 110 mm
• Min. thickness: 37 mm
• Weight [g]: 11.700 kg
• Height: 57.5 mm

ブレーキディスク
Brake Disc

• Fitting Position: Front Axle
• Bolt Hole Circle Ø: 104 mm
• Height: 80 mm
• Ø: 265 mm
• Brake Disc Thickness: 35 mm
• Min. thickness: 32 mm
• Number of bores: 6

ブレーキディスク
Brake Disc

 nano ceramic composite brake disc, high friction, after 1000 km brake disc and brake pad running, the braking distance of 100km/h is shortened by 10%, and the driving safety performance is doubled. Installation instructions: 1, the nano ceramic brake disc is suitable for the original car size installation. 2, the new brake disc brakes need 500km-1000km driving to make the brake disc brakes fully run. 3. After the new brake disc is installed, the “beep” sound caused by the surface friction caused by the excessive friction coefficient is normal running-in, which will decrease with the increase of the mileage. 4, do not try to "pierce, drill, nail, knock" and other actions to destroy the material installed on the surface of the nano-ceramic brake disc. 5. The nano-ceramic brake disc will have a normal resin after the continuous installation of the brake disc within 1000km. 6. Drive carefully before the product meets the performance response after reaching the normal running-in (1000km).

ブレーキディスク
Brake Disc

 nano ceramic composite brake disc, high friction, after 1000 km brake disc and brake pad running, the braking distance of 100km/h is shortened by 10%, and the driving safety performance is doubled. Installation instructions: 1, the nano ceramic brake disc is suitable for the original car size installation. 2, the new brake disc brakes need 500km-1000km driving to make the brake disc brakes fully run. 3. After the new brake disc is installed, the “beep” sound caused by the surface friction caused by the excessive friction coefficient is normal running-in, which will decrease with the increase of the mileage. 4, do not try to "pierce, drill, nail, knock" and other actions to destroy the material installed on the surface of the nano-ceramic brake disc. 5. The nano-ceramic brake disc will have a normal resin after the continuous installation of the brake disc within 1000km. 6. Drive carefully before the product meets the performance response after reaching the normal running-in (1000km).

ブレーキドラム
Brake Drum

• nner Br. Dr. Diam.: 254 mm
• Hub Bore Ø: 101 mm
• Fitting Position: Rear Axle
• Inner Br. Dr. Height: 60 mm
• Number of bores: 6

ブレーキドラム
Brake Drum